1.The C-body design,whole body casting,After high temperature aging treatment,rigid and stable,The deformation is small.
2.PLC control,on the screen can be arbitrary set speed,pressure time,repeated high positioning accuracy,good performance.
3.Equipped with sensors in hydraulic system and pressure sensors,display actual pressure,Pressure detection range can be set,Detection of press-fit products are qualified,Products in the process of pressing,overvoltage and undervoltage will automatically alarm and shutdown.
4.The whole hydraulic system,the pressure is strong,the work performance is stable,The accuracy of the pressure is high,the adjustment range is large.
5.Security design,using both hands to operate,with emergency stop and jog up and down function.
6.Spindle down,with two speeds,fast-forward and slow forward,fast forward speed is fast and can improve work efficiency;Slow forward speed can be adjusted,to improve the quality of press-fit, protection of mold and products.
7.Two of the cycle start-up mode:buttons and pedals.
8.The whole control system is using imported high-end brand-name products,PLC,The touch screen is the use of high-end brands such as Siemens,Mitsubishi,Wei Lun,The hydraulic system is the use of imported dual proportional system valve (Specific configuration,see the configuration list).
9.The seal is NOK from Japan and Taiwan tripod base,hydraulic fittings using brand-name products of taiwan.
10.Infrared protection device(according to customer's requirements).
11.Failure warning, pre-diagnosis, fault diagnosis function (optional)