1.C-type single-column design,machine tool bed HT300 casting,after high temperature aging treatment,good rigidity,a small amount of deformation.
2.Under pressure stroke can be adjusted,high positioning accuracy,and reliability good.
3.The whole hydraulic system,the pressure is strong,the work performance is stable,the stroke of stamping can be arbitrarily adjusted,and the pressure regulating range.
4.Security design,using both hands to operate,with emergency stop and jog up and down function.
5.Professionally design the correction tool for axis and profiles: the press fitting of axis sets, cast of plate material, bending emboss, stretch, power pressing and other artwork.
6.Spindle down,with two speeds,fast-forward and slow forward,fast forward speed is fast and can improve work efficiency;Slow forward speed can be adjusted,to improve the quality of press-fit,protection of mold and products.
7.Two of the cycle start-up mode:buttons and pedals.
8.The seal is NOK from Japan and Taiwan tripod base,hydraulic fittings using brand-name products of taiwan.
9.Infrared protection device (according to customer's requirements).
10.Failure warning, pre-diagnosis, fault diagnosis function (optional).